Intermec PB50 Uživatelský manuál stáhnout pdf (Strana 35)

Chapter 2 — Configuring the PB50

PB50 Mobile Label and Receipt Printer User’s Guide 25

Changing Configuration Settings From PrintSet

PrintSet Version 4.2 (or higher) is a printer configuration tool that

you can download from the Intermec web site. PrintSet can

communicate with your printer through a serial cable or a network

connection. It works on all PCs running Windows 98 (or later).

PrintSet allows you to easily change all of the setup parameters. It also

includes setup wizards to guide you through some common

configuration tasks.

Changing Configuration Settings Using the Command

Line

You can change configuration parameters by sending commands

directly to the printer using your terminal program (HyperTerminal)

and a serial or network connection.

If your printer uses the Fingerprint language, you use the SETUP

command, followed by the node, subnode, and parameters setting.

Here is a Fingerprint example that sets your media setting to labels

with gaps:

SETUP "MEDIA,MEDIA TYPE,LABEL (w GAPS)"

If your printer uses the IPL language, you would send this command:

Fingerprint automatically sends feedback to HyperTerminal as you

type. If you want to see what you are typing with IPL, you need to

complete the following procedure.

To see IPL commands as you type

1 From the HyperTerminal menu, select File > Properties > the

Settings tab.

2 Click the ASCII Setup button.

3 Select Echo typed characters locally.

4 Click OK twice.

For more information on how to change configuration settings, see

either the Fingerprint Command Reference Manual (P/N 937-005-xxx) or

the IPL Command Reference Manual (P/N 937-007-xxx). You can

download both documents from the Intermec web site at

www.intermec.com.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 71 72

Žádné komentáře

Intermec PB50 Uživatelský manuál Strana 35