
Chapter 8 — Troubleshoot and Maintain the Computer
70 Series Mobile Computer User Manual 125
Troubleshoot Operating the Computer
Use this section to troubleshoot problems that may prevent you from
being able to operate the computer.
Problems Operating the Computer
Problem Solution
You press the Power button
and nothing happens.
Try the following solutions:
• Replace or charge the battery. The battery may be completely
drained.
• Remove the battery and press the Reset button to perform a cold
boot. For help, see “Cold Boot the Computer” on page 128
.
The computer appears to be
locked up and you cannot
enter data.
• Press the Power button and select Suspend from the Power
Options menu. Press the Power button to turn the screen back on.
• Press the Power button and select Reboot from the Power
Options menu.
• Remove the battery and press the Reset button to perform a cold
boot. For help, see “Cold Boot the Computer” on page 128
.
•
Try reloading the firmware. For help, see “Update the System
Software” on page 114.
• If the computer does not boot or reset, contact your Intermec
representative for help.
The accelerometer does not
appear to be accurate.
You may need to calibrate the accelerometer using the Sensor
Calibration application. Tap Start > Settings > System > Sensor
Calibration. Rotate the computer to calibrate all six orientations.
You tap the screen and
nothing happens.
Align your screen. For help, see “Align the Screen” on page 45.
You cannot type a character
on the keypad or you can
only type uppercase or
lowercase letters.
You may have locked a modifier key on the keypad. Press the
necessary key sequence to unlock the key. For help, see “About the
Keypad” on page 16.
Komentáře k této Příručce