Intermec CK3R Uživatelský manuál Strana 60

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 138
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 59
Chapter 3 — Configure the Computer
48 CK3R and CK3X Mobile Comptuer User Manual
Configure the Computer Remotely with
SmartSystems
You can use Intermec Settings from a SmartSystems console to
remotely configure all the Intermec computers. For help using
Intermec Settings, click Help > Contents. For information on all the
parameters in Intermec Settings, see the Intermec Settings
Command Reference Manual.
1 In the SmartSystems console, select a computer and then
right-click on it. A list appears.
2 Select Start Intermec Settings.
3 Configure the settings you want to change. As you select
parameters, help for each parameter appears in the upper right
pane.
4 When you are done making changes, select File > Save Settings.
About Network Communications
You can use the mobile computer in your wireless or wired data
collection network. You can connect your computer using:
802.11 radio communications.
Ethernet communications.
Bluetooth communications.
USB and serial communications.
Configure 802.11 Radio Communications
The CK3R has an 802.11b/g/n radio and the CK3X has an
801.11a/b/g/n radio to transfer data using wireless communications.
Before you configure radio communications, you need to have your
wireless network set up including your access points.
Caution: Make sure all components with antennas are at least 30
cm (1 ft) apart when power is applied. Failure to comply could
result in equipment damage.
Zobrazit stránku 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 137 138

Komentáře k této Příručce

Žádné komentáře