Intermec CK3B Uživatelský manuál stáhnout pdf (Strana 23)

Chapter 1 — Using the Computer

CK3 Mobile Computer User’s Manual 11

The Caps Lock LED lights up green to show that the CK3 is in the

Caps Lock mode.

To disable Caps Lock

• Press the color modifier key again.

For information on how to enter specific characters with keystrokes,

see “Keypads and Keystrokes” on page 107.

Using the Power Button

When you press the Power button ( ), you put the CK3 into suspend

mode. In this lower power mode, the CK3 continues to supply power

to all memory, but turns off power to most hardware such as the

display. This power-saving feature is designed to prolong battery life.

When you press to turn the CK3 back on, your computer resumes

at the screen that was displayed when you turned it off. If you are

using WPA or 802.1x security, the CK3 may need to reauthenticate

before it resumes your application.

If the battery light flashes and your CK3 does not resume after

pressing , your battery may be too low to supply power. Replace the

battery. If replacing the battery does not solve the problem, see

“Resetting the CK3” on page 77.

Configuring the Backlight Settings

By default, the CK3 goes into Screen Off mode when there is no

activity on the computer. Screen Off mode turns off the backlight and

display. Press a key or tap the screen to resume activity.

To configure the backlight

1 Tap Start > Settings > the System tab > the Backlight icon > the

Battery Power tab.

2 With Turn off backlight if device is not used for checked, select

the timeout value (10 seconds, 30 seconds, or 1 to 5 minutes).

You can also use Intermec Settings to configure the backlight

settings.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 134 135

Žádné komentáře

Intermec CK3B Uživatelský manuál Strana 23